Maintenance of vertical packaging machine.
14 Apr 2021
The vertical packaging machine is mainly used for the packaging of food in life. The packaging style not only meets the national health standards, but also the packaging is beautiful. In the packaging machinery industry, vertical packaging machines are widely used, but there are also many users who do not know how to maintain them, which often causes various problems in packaging machines. The overall maintenance of the vertical packaging machine is divided into three steps: mechanical parts, electrical parts and mechanical lubrication.
Maintenance of electrical parts:
1. The operator of the vertical packaging machine should always check whether there are any signs of looseness in the thread end of the joint before starting the packaging machine.
2. Tiny particles like dust may also affect some functions of the packaging machine. When there is dust on the photoelectric switch or proximity switch probe, it may cause malfunction, so it should be checked and cleaned frequently.
3. The details are also the focus of mechanical cleaning. For example, regularly clean the surface of the horizontal gasket slip ring with soft gauze and alcohol to remove the toner on the surface.
4. Some parts of the vertical packaging machine cannot be replaced at will. Non-professionals are not allowed to open the electrical part. The parameters or steps of the inverter, microcomputer and other control components have been set. Any changes will cause the system to malfunction and the machine will not work properly.
Mechanical lubrication:
1. Rolling bearings are parts with severe wear in the machine. Therefore, each rolling bearing should be oiled with a grease gun once, about once every two months.
2. Different types of lubricating oil are different, such as the bushing on the winding roller and the bushing on the front sprocket of the feeding conveyor should be filled with 40# mechanical oil.
4. Lubrication of the chain is the most common. Each sprocket chain must be injected with mechanical oil with a kinematic viscosity greater than 40#.
5. The clutch is the key to starting the packaging machine, and the clutch parts should be lubricated at an appropriate time.
Maintenance of electrical parts:
1. The operator of the vertical packaging machine should always check whether there are any signs of looseness in the thread end of the joint before starting the packaging machine.
2. Tiny particles like dust may also affect some functions of the packaging machine. When there is dust on the photoelectric switch or proximity switch probe, it may cause malfunction, so it should be checked and cleaned frequently.
3. The details are also the focus of mechanical cleaning. For example, regularly clean the surface of the horizontal gasket slip ring with soft gauze and alcohol to remove the toner on the surface.
4. Some parts of the vertical packaging machine cannot be replaced at will. Non-professionals are not allowed to open the electrical part. The parameters or steps of the inverter, microcomputer and other control components have been set. Any changes will cause the system to malfunction and the machine will not work properly.
Mechanical lubrication:
1. Rolling bearings are parts with severe wear in the machine. Therefore, each rolling bearing should be oiled with a grease gun once, about once every two months.
2. Different types of lubricating oil are different, such as the bushing on the winding roller and the bushing on the front sprocket of the feeding conveyor should be filled with 40# mechanical oil.
4. Lubrication of the chain is the most common. Each sprocket chain must be injected with mechanical oil with a kinematic viscosity greater than 40#.
5. The clutch is the key to starting the packaging machine, and the clutch parts should be lubricated at an appropriate time.
