In the process of using the vertical packing machine, it may be caused by incorrect adjustment before use or incorrect operation, which will cause the small vertical packaging machine to pull the film deviation. Then how to solve the deviation of the vertical packing machine pull film?

Step 1: After the packaging film is installed, start the test. After the packaging film is made into a bag, it appears that the left side of the bag is shorter than the right side of the bag on the back of the package. Next, adjust the forming device of the packaging machine according to the deviation of the packaging film.
Step 2: Loosen the two screws next to the shaper. After loosening, if the right side of the back seal is more than the left side, use the H-shaped stainless steel plate to knock it to the left with a wrench to move the H-shaped stainless steel plate to the left , Move a little bit, after the movement is completed, lock the two screws. If the left side of the back seal is more than the right side, then the H-shaped stainless steel plate is knocked to the right.
The third step: After the processing is completed, start the test to see if the debugging is good, if not, continue to follow this step to deal with the deviation of the packaging film of the vertical packaging machine.